Due to cost of webhosting I may not be able to continue to provide this content free for much longer. I'm asking for your support by providing a donation to keep this site active. The only other choice that I have is to convert his site to one that is accessable only to subscribers, and I really don't want to go that route.

You can do so simply by clicking the button below and donating whatever you like.
To donate you can either use your PayPal account or a credit card (using secure authorization).
Donations can be for as little as $1.00

Windshield Frame

Here is the fixture with the parts glued and each are brad-nailed from the outside to the fixture.
Don't nail them from the inside - you will see the holes when installed!!

G14 which is at the bottom of the image has a 20 degree angle on the opposite side so I made
a spacer with the same angle to square it up for glueing.

© 2005-2010 Briery Mountain Enterprises, LLC Creative Commons "Some Rights Reserved"

Except where otherwise noted, this site is licensed under a Creative Commons License